Article

This article explains how piston rubber seal durability is measured, which failure modes dominate service life, common test standards (compression set, wear, thermal aging), and realistic lifespan expectations for common elastomers in hydraulic service. Practical maintenance, material selection advice, test-data comparison, and how Polypac’s manufacturing and R&D capabilities address long-life sealing needs are included.

A practical, engineering-focused guide to selecting, specifying, and validating wiper rings (scraper seals) for food and pharmaceutical equipment. Covers functional roles, material choices (elastomers and filled PTFE), regulatory considerations (FDA/USP), design and installation best practices, cleaning/CIP-SIP resilience, testing and validation, supplier selection criteria, and a material comparison table with authoritative sources. Includes FAQs and contact/CTA for custom solutions.

A practical, engineering-focused guide to selecting scraper seals by material. Covers application requirements, material pros/cons (NBR, FKM, PU, PTFE, EPDM, Silicone, FFKM), testing and specification tips, a comparison table with sourced data, and Polypac's manufacturing capabilities and product offerings.

A practical guide for procurement and engineering teams on sourcing ISO-certified wiper ring suppliers. Covers certification types, supplier audits, material and test requirements, quality metrics, and a step-by-step supplier selection process, with verifiable references and a supplier profile of Polypac.

This article explains common failure modes of wiper rings (scraper seals) in hydraulic systems, their root causes, inspection and installation best practices, material and design choices to reduce downtime, and actionable prevention strategies. Includes industry references and guidance from a seal manufacturing perspective.

Wiper rings (scraper seals) protect hydraulic cylinders from external contamination and extend seal life. This guide explains how wiper rings work, compares top materials (PU, NBR, FKM, PTFE composites), provides application-focused recommendations, installation and maintenance tips, and highlights Polypac's manufacturing strengths and product range for custom sealing solutions.

This article explains the functional and design differences between wiper rings and dust seals for hydraulic and pneumatic equipment. It helps buyers choose the right seal by comparing materials, installation, performance, maintenance, and cost, supported by authoritative sources and industry best practices.

This practical guide explains how to measure wiper rings (scraper seals/rod wipers) accurately for replacement, inspection, and custom manufacturing. It covers required tools, step-by-step measurement of ID/OD/cross-section and groove dimensions, common pitfalls, tolerance recommendations, verification tests, and supplier considerations to ensure reliable hydraulic sealing performance.

A detailed, application-driven comparison of PTFE, rubber (NBR/FKM/EPDM) and polyurethane (PU) for wiper rings used in hydraulic and pneumatic systems. Covers material properties, wear and friction, chemical and temperature compatibility, cost and manufacturability, real-world selection guidance, testing tips, and why choosing an experienced supplier like Polypac matters.

A practical, technical buying guide for selecting the right wiper ring (scraper seal) for hydraulic and pneumatic equipment. Covers function, materials, profiles, sizing, installation, testing, common failure modes, and manufacturer selection, with actionable tips and Polypac solutions.

This article explains sanitary considerations for rotary seals used in food and pharmaceutical equipment. It covers regulatory drivers, material selection (elastomers vs. PTFE/FFKM), CIP/SIP compatibility, hygienic design principles, testing and maintenance, and practical selection guidance. Polypac's capabilities and product range are introduced for custom sanitary sealing solutions.

This guide explains how to select rotary seals for high-speed rotating shafts, covering failure modes, material and design choices (elastomers, PTFE, O-rings, back-up rings), installation and testing, PV limits, and supplier selection. It provides practical selection tables, industry references, and FAQs to help engineers choose reliable rotary shaft sealing solutions.

This article compares rotary seals made from rubber, PTFE, and metal from a lifecycle-cost and application-fit perspective. It explains performance trade-offs (friction, wear, chemical resistance, temperature), shows a cost-impact table for procurement and maintenance, and provides a practical selection guide. Includes Polypac's capabilities and FAQs to help engineers choose and source rotary seals.

Practical guidance on selecting, specifying and maintaining piston rod seals for food and pharmaceutical equipment. Covers sanitary design, compliant materials (FDA/USP/3-A/EHEDG), common failure modes, CIP/SIP considerations, material comparison, and supplier selection to reduce contamination risk and downtime.

A comprehensive technical guide to piston rod seal failure modes, how to diagnose root causes, corrective actions and prevention strategies. Covers mechanical, material, installation, and environmental causes with actionable troubleshooting steps, a comparison table of failure signatures vs. causes, guidance on materials and design choices, and practical maintenance best practices. Includes manufacturer profile and product solutions from Polypac plus FAQ and references.

Practical, experience-based guidance for engineers and procurement professionals on selecting and specifying piston rod seals for high-pressure hydraulic applications. Covers sealing principles, material choices, extrusion control, gland design, testing, and installation best practices. Includes material comparison table, standards references, and a vendor profile of Polypac — a technical hydraulic seal manufacturer and custom supplier.

A practical, engineering-focused comparison of PTFE, NBR (nitrile rubber) and PU (polyurethane) for piston rod seals. Covers material properties, dynamic performance, chemical and abrasion resistance, typical failure modes, selection guidance, test/data-backed comparisons, and application-driven recommendations. Includes a Polypac capability profile and FAQs to help procurement and design decisions.

This article explains critical groove geometry and surface-finish requirements for reliable rotary seal performance. It covers functional objectives, recommended shaft roughness and hardness ranges, groove tolerances and materials, testing and inspection methods, and practical troubleshooting. Includes design tables, standards-based references, and a supplier profile for Polypac, a technical seal manufacturer.

This article explains when to specify custom rotary seals versus off-the-shelf rotary seal options. It covers failure modes, design triggers for bespoke solutions, material and testing considerations, cost-benefit analysis, and supplier selection criteria. Polypac's capabilities and product range are summarized as an example of a technical seal manufacturer able to deliver customized rotary sealing solutions.

This in-depth guide covers selection, compliance and cleanability of rotary seals used in food and pharmaceutical rotating equipment. It explains regulatory requirements (FDA, EU, 3-A, EHEDG), material choices (PTFE, FKM, NBR, silicone, EPDM, FFKM), hygienic design principles, CIP/SIP practices, test and validation strategies, and provides practical selection checklists. Includes comparative tables, references, and product/provider information for Polypac.

This article provides practical, engineering-focused best practices for designing rotary seals to achieve long service life. It covers material selection, shaft and housing tolerances, surface finish, lubrication, dynamic sealing geometry, installation and testing, common failure modes with mitigation, and maintenance strategies. Includes comparative material and failure-mode tables, references to authoritative sources, and information on custom sealing solutions from Polypac.

A practical, engineering-focused comparison of PTFE, NBR, and FKM for rotary seal applications. Covers material properties, performance trade-offs, failure modes, selection guidelines, and a comparison table. Includes Polypac's capabilities and product lines for custom sealing solutions.

A practical guide to selecting rotary seals for industrial pumps: understand failure modes, compare materials and designs, follow a step-by-step selection checklist, and learn when to choose custom solutions. Includes material comparison tables, installation tips, FAQs, and Polypac's capabilities for bespoke sealing solutions.

Comprehensive guide to diagnosing and fixing noise and vibration caused by oil hub seals. Covers common causes (installation, wear, contamination, lubrication, material mismatch), measurement methods, step-by-step troubleshooting, repair vs replacement criteria, material and design considerations, test methods, and prevention. Includes practical checklists, a comparison table, recommended tools, industry-standard references, and a manufacturer profile (Polypac) with product and capability highlights. Includes FAQs and contact/CTA.